HiKOKI DH36DMA – CORDLESS ROTARY HAMMER
RM4,491.00
SPECIFICATION
Capacity: (Concrete) 40 mm | (Core Bit) 105 mm
Bit Shank: SDS max
Battery Voltage: 36V
Impact Energy: 8.5 Joules
No Load Speed: 260 – 590 /min.
Full Load Impact Rate: 1,420 – 2,860 /min.
Overall Length: 496 mm
Weight: 7.9 kg
Vibration Total Values(triax vector sum), Hammer Drilling into Concrete:
Vibration Emission Value ah, HD = 11.8 m/s2
Uncertainty K = 2.6 m/s2
Vibration Total Values(triax vector sum), Equivalent Chiseling Value:
Vibration Emission Value ah, HD = 9.6 m/s2
Uncertainty K = 1.5 m/s2
Scope Of Delivery
• 1x Hikoki Cordless Rotary Hammer DH36DMA
• 1x Hikoki 36V Starter Pack 3 (2.5Ah x 2)
• 1x Side Handle
• 1x Depth Gauge
12 MONTHS WARRANTY
Description
Electric (AC) Performance without the Cord
The MULTI VOLT DH36DMA Cordless Rotary Hammer is our first SDS-max cordless rotary hammer that uses the high-power BSL36B18
MULTI VOLT battery and a brushless motor. It delivers a drilling speed and demolition performance comparable to its corded counterpart.
• Drilling Speed
Speed of the DH40MC rotary hammer indexed at 100.
When drilling a Ø25mm hole into concrete with compressive strength of 2,352 N/cm2 (240 kgf/cm2).
• Demolition Performance
When demolishing concrete with a compressive strength of 2,352 N/cm2 (240 kgf/cm2).
• Runtime per Charge (with BSL36B18 battery)
Approx. 25 Holes (Drilled in Ø25x60L Concrete)
Approx. 11 Min. (Equivalent to 26kg Concrete Breaking)
Robust Looks
With part of its aluminum die-cast cylinder case and crank case
exposed, the DH36DMA looks robust and sophisticated.
Ease of Use
• One-push Bit Mounting
Only one action instead of the conventional two is required to mount a bit. All that needs to be done is to insert the bit into the tool holder while turning it.
• Large Change Lever
Large change lever is located on top of the tool body for easy visibility and smooth mode changing.
• Multiple Bit-angle Settings
The chisel can be rotated at 12 different angles with the change lever positioned at ‘neutral’.
• Low Vibration Handle
The HiKOKI low vibration handle, which consists of the upper unit with rubber dampers and the lower unit with a hinge, reduces vibration and user fatigue, offering high productivity.
• Constant Speed Control with Variable Speed
Four-step impact rates between 1,420bpm and 2,860bpm can be selected by the rotation speed selector switch.
Safety
• Battery Stopper
A battery stopper helps prevent the battery from accidentally falling out of the tool. The battery cannot be removed unless both the stopper and the battery latches are released.
Reactive Force Control (RFC)
When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool’s built-in controller stops the motor’s output before the entire tool jerks.
Additional information
| Weight | 9 kg |
|---|---|
| Dimensions | 30 × 40 × 35 cm |
