HiKOKI DH12DD – CORDLESS ROTARY HAMMER
RM729.00
SPECIFICATION
Capacity:
• Concrete – 18 mm
• Selt – 13 mm
• Wood -18 mm
Battery Voltage: 10.8 – 12V Peak
Bit Shank: SDS-plus
Impact Energy: 1.2 Joules
No Load Speed: (Normal) 0 – 1,080 /min. | (Low) 0 – 800 /min.
Full Load Impact Rate: (Normal) 0 – 5,500 /min. | (Low) 0 – 4,100 /min.
Overall Length: 246 mm
Weight: 2.1 kg
Vibration Total Value (triax vector sum), Hammer Drilling into Concrete:
Vibration emission value ah, HD = 9.1 m/s2
Uncertainty K = 1.5 m/s2
Scope Of Delivery
Solo / None
• 1x HiKOKI Cordless Rotary Hammer DH12DD
Combo 1
• 1x HiKOKI 12V 2.5Ah Battery BSL1225M
• 1x HiKOKI 12V Battery Charger UC 12SL
Combo 2
• 1x HiKOKI 12V Starter Pack 2 (4.0Ah x 2)
12 MONTHS WARRANTY
Description
• Compact, Lightweight, and Well-balanced
Users feel less fatigue due to the compact, lightweight and well-balanced design with most of the weight positioned close to the hand.
* With BSL1240M Battery (inc. Side Handle)
• Class-Leading Drilling Speed
The DH12DD is suited for drilling small holes into concrete, completing the job faster than corded counterparts.
• Low Vibration, Low Vibration Handle (LVH)
The low vibration handle provides rubber handle dampers to absorb vibrations and shocks during operation.
• Bright LED Light
Illuminates the spot you are working on.
• 2-step Rotation Speed for Different Applications
Makes it easy to drill a fragile material by pressing the changeover switch to reduce the rotation speed and impact rate.
• Built-in Auto Stop Function, for Consistently Drilling Holes
Once the initial drilling time is recorded on the tool, the motor is designed to automatically stop when the recorded time has passed, enabling a stable and efficient continuous operation.
CAUTION!
The auto stop function is used to record the drilling time. Thus, it may not provide the same drilling depth owing to the operator position, pushing force, and variation among the workpieces. Please use a depth gauge to ensure the drilling depth.
• Reactive Force Control (RFC), Against Sudden Overburdening
When the tool bit is suddenly overburdened during operation, the slip clutch works or the built-in controller stops the motor output before the entire tool jerks.
CAUTION!
Depending on the operating conditions, the Reactive Force Control function may not work or provide the specified performance. Please make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
• Runtime per Charge
• 12V Peak
Slide Lithium-Ion Batteries
• Lightweight. Compact. High-Capacity.
• Clear Battery Status Indication
The remaining battery indicator lamp shows not only charge level but also battery overheating and failure when they occur.
* 1: Remove the battery from the tool and allow it to cool down fully.
* 2: The problem may be with the battery so please contact your dealer.
• Class-leading Charging Speed
Approx. 60min with BSL1240M Battery
Approx. 37min with BSL1225M Battery
Additional information
| Weight | 5 kg |
|---|---|
| Dimensions | 25 × 32 × 28 cm |
